LM 330 Contact-Grease

DESCRIPTION LM 330 Contact Grease is a grease-type, fully synthetic contact treatment preparation free of silicones. The special additives, synthetic oil and consistency modifiers in this product ensure that it can be used over a wide range of temperatures. The product shows no signs of chemical decomposition or resinifying even after long periods of use.-

PROPERTIES - stable to ageing, liquifying and oxidation
- reduces contact resistance
- suppresses arcing and wear
- penetrates layers of oxides and sulphides
- high corrosion protection

TECHNICAL
DATA Colour : yellowish brown
Basis : synthetic oil
Consistency modifiers : inorganic thickeners
Flow pressure at -35 °C : 450 hPa DIN 51 805
Density at 20°C : 1.0 g/cm3 DIN 51 757
Drop point : non-drip DIN ISO 2176
NLGI-Klasse : 1
Operating temperature range: -40 °C to +150 °C
Oil separation 10d/40 °C : max. 5.0 wt % DIN 51 817
Water resistance : 0 - 1 DIN 51 807
Working resistance after
60,000 double strokes : max. +30 1/10 mm DIN ISO 2136
Copper corrosion : 0/1 DIN 51 811
specific electrical
resistance : 3.5 · 108 Ohm · cm

APPLICATION LM 330 Contact Grease is mainly suitable for the maintenance and protection of all types of contacts in weak-current engineering. This applies both to predominantly dormant contacts (such as plug connections and compensating controllers) and to moving contacts (such as switches, sliders, relays and wire-wound potentiometers etc.).

INSTRUCTIONS Before treating with LM 330 Contact Grease, the contact surfaces must be clean and free from residues such as lubricants, dirt and moisture. Apply the product as a thin, uniform layer.

Before using the product, check for compatibility plastics sensitive to stress-cracking.

AVAILABLE
PACK SIZE LM 330 Contact Grease 500 g can Part no. 3230
800 g can Part no. 3274
25 kg hobbock Part no. 3271